Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
PK 33002 EH High Performance
Surface protection of highest quality. Perfect appearance during the entire lifetime.
- More efficiency with fly-jib due to DPS Plus
- Perfect appearance and the highest value retention due to coating technology
- Additional applications with Power Link Plus
- More lifting power due to E-HPLS
- Increased operating times due to low-maintenance extension system
Brochures
| Max. lifting moment | 30.0 |
| Max. lifting capacity | 10000 |
| Max. hydraulic outreach | 21.3 |
| Max. outreach (with fly jip) | 29.4 |
| Slewing angle | 400° |
| Slewing torque | 3.2 |
| Stabilizer spread (std) | 5.6 m |
| Fitting space required (std) | 1.01 |
| Width folded | 2.53 |
| Max. operating pressure | 350 |
| Pump capacity | 80 - 100 l/min |
| Dead weight (std.) | 2876 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 30.1 mt | 8.1 m | 400 | 3.2 | 35.0 Mpa | 80-100 | 2876 kg | 2350 mm | 2525 mm | 1010 mm | 7880.01 mm | 10000 kg | 3800 kg |
| B | 29.6 mt | 10.2 m | 400 | 3.2 | 35.0 Mpa | 80-100 | 3077 kg | 2350 mm | 2525 mm | 1010 mm | 10060.01 mm | 10000 kg | 2850 kg |
| C | 28.9 mt | 12.4 m | 400 | 3.2 | 35.0 Mpa | 80-100 | 3291 kg | 2350 mm | 2525 mm | 1085 mm | 12240.01 mm | 10000 kg | 2150 kg |
| D | 28.4 mt | 14.6 m | 400 | 3.2 | 35.0 Mpa | 80-100 | 3469 kg | 2350 mm | 2525 mm | 1125 mm | 14420.01 mm | 9800 kg | 1680 kg |
| E | 27.9 mt | 16.8 m | 400 | 3.2 | 35.0 Mpa | 80-100 | 3615 kg | 2350 mm | 2525 mm | 1160 mm | 16650.01 mm | 9400 kg | 1340 kg |
| F | 27.6 mt | 19.1 m | 400 | 3.2 | 35.0 Mpa | 80-100 | 3728 kg | 2350 mm | 2525 mm | 1160 mm | 18880.01 mm | 9100 kg | 1080 kg |
| G | 27.2 mt | 21.3 m | 400 | 3.2 | 35.0 Mpa | 80-100 | 3837 kg | 2350 mm | 2525 mm | 1160 mm | 21110.01 mm | 8800 kg | 860 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
